The answer to this question is a bit complicated and depends on the specific situation. In general, drip edge should be installed behind the gutters, but there are some cases where it may be installed into the gutters.
If the gutters are installed correctly, the water will flow into the gutters and not behind them. However, if the gutters are not installed correctly, the water can flow behind the gutters and cause problems. In this case, it is best to install the drip edge behind the gutters to ensure that the water flows into the gutters and not behind them.
There are also cases where the drip edge may be installed into the gutters. This is usually done when the gutters are not installed correctly and the water is flowing behind the gutters. In this case, the drip edge will help to redirect the water into the gutters.
Do gutters go under or over drip edge?
The answer is actually quite simple. Gutters go over the drip edge. The drip edge is a metal strip that is installed on the outer edge of the roof. It helps to direct water away from the shingles and into the gutter.
Where should drip edge be installed?
Drip edge is a metal strip that is installed along the edges of a roof. It is used to direct water away from the roof and into the gutters. Drip edge should be installed on all types of roofs, but it is especially important on shingle roofs. This is because shingles are not waterproof and can be damaged by water that is allowed to seep under them.
How far below drip edge should gutters be installed?
Gutters should be installed at least 4 inches below the drip edge to ensure proper drainage. If gutters are installed any higher, water can back up and cause damage to the home. Additionally, the gutters should be installed with a slight slope so that water can drain properly.
Does fascia go behind gutters?
Fascia is the trim that goes around the edge of your roof. It is usually made of wood, but can also be made of aluminum or vinyl. Gutters are the channels that catch the water that runs off your roof and direct it away from your house. They are usually made of aluminum or plastic.
How do you install drip edge with existing gutters?
- Measure the length of your gutters and cut the drip edge to size.
- Install the drip edge on the front edge of the gutters, making sure that the lip is facing down.
- Use screws or nails to secure the drip edge in place.
- That’s it! You’ve now installed drip edge on your existing gutters.
Why does water run behind my gutters?
Water runs behind gutters for a variety of reasons. One reason is that the gutters are not installed properly. If the gutters are not pitched correctly, then the water will run behind them instead of into them. Another reason is that the gutters may be clogged. If the gutters are clogged, then the water has nowhere to go but behind them. Finally, if the gutters are not installed properly and they are also clogged, then the water will run behind them and cause the gutters to overflow.
What is the proper way to install drip edge on a roof?
Installing drip edge is an important part of roofing. It helps to protect the edge of the roof from water damage and rot. There are a few different ways to install drip edge, but the most important thing is to make sure that it is installed properly.
The first step is to measure the length of the drip edge. You will need to cut the drip edge to fit the length of the roof. Make sure to cut the drip edge at a slight angle so that it will shed water away from the roof.
Next, you will need to nail the drip edge to the roof. Start at one end of the drip edge and nail it into place. Make sure that the nails are driven into the sheathing so that they will be hidden by the shingles. Work your way down the length of the drip edge, nailing it in place as you go.
Once the drip edge is installed, you can install the shingles. Start at the bottom of the roof and work your way up. Make sure that the shingles overlap the drip edge so that water will be directed away from the edge of the roof.
Final Talk
There are pros and cons to installing drip edge behind the gutters or into the gutters. Ultimately, it is up to the homeowner to decide which option is best for their home.
