- Begin by measuring the length of the gutter you will be installing.
- Cut the gutter to size, using a hacksaw.
- Install the gutter hangers, using screws and washers.
- Hang the gutter on the hangers, and secure in place with screws.
- Install the downspout, using screws.
- Seal the seams of the gutter and downspout with caulk.
Should gutters be flush with fascia?
The answer is no, gutters should not be flush with fascia. There are a few reasons for this. The first reason is that if gutters are flush with fascia, then when it rains, water will pour down the sides of the gutters and onto the fascia, causing it to rot. The second reason is that if gutters are flush with fascia, then debris will build up on the sides of the gutters and eventually clog them. The third reason is that if gutters are flush with fascia, then they will be more likely to pull away from the fascia over time due to the weight of the water and debris.
Can you attach gutters to rafter tails?
Yes, you can attach gutters to rafter tails, but you will need to use special brackets that are specifically designed for this purpose. You will also need to make sure that the gutters are properly sealed and that the downspouts are installed in such a way that they will not cause water to pool around the foundation of your home.
What is an alternative to gutters?
- Gutter guards: Gutter guards are installed over the top of gutters and help to keep leaves and debris from clogging them.
- Leaf guards: Leaf guards are installed inside the gutters and help to prevent leaves and debris from entering and clogging them.
- Gutter covers: Gutter covers are installed over the top of gutters and help to keep leaves and debris from entering and clogging them.
- Downspout filters: Downspout filters are installed at the base of the downspouts and help to catch leaves and debris before they enter the gutters.
- Rain chains: Rain chains are installed in place of downspouts and help to redirect rainwater away from the home.
What are some common mistakes that people make when installing gutters?
- Not ensuring that the gutters are properly pitched. This is one of the most important aspects of proper gutter installation, as gutters that are not pitched correctly will not be able to drain properly and will eventually lead to water damage.
- Not properly attaching the gutters to the fascia board. This can lead to gutters coming loose and eventually falling off, which obviously creates a major problem.
- Not using the proper size gutters for the size of the home. This is a mistake that people often make when trying to save money by using smaller gutters. However, smaller gutters will not be able to handle the same amount of water as larger gutters and will eventually lead to problems.
- Not cleaning out the gutters on a regular basis. This is a mistake that can lead to a number of problems, such as clogged gutters, which can eventually lead to water damage.
What should you not do when installing gutters?
- Don’t use too much pressure when cleaning the gutters, as this can cause them to bend or break.
- Don’t try to install the gutters yourself unless you are confident in your ability to do so – it’s always best to hire a professional.
- Don’t forget to properly seal the gutters after installation to prevent leaks.
How high should gutters be on fascia?
There is no definitive answer to this question as it will depend on the specific design of your home and the amount of rainfall you typically experience. However, as a general rule of thumb, gutters should be installed at least 6 inches above the fascia board to allow for proper drainage. If your home is located in an area with heavy rainfall, you may need to install the gutters higher up on the fascia board to prevent water from overflowing.
Should gutters extend past the roof line?
- It’s a waste of material. Gutters are made to channel water away from your roof and foundation, so there’s no need to extend them past the roof line.
- It looks bad. Let’s face it, extended gutters just look tacky. They add an unnecessary element to your home’s exterior and can make your house look like it’s falling apart.
- It’s a safety hazard. Extended gutters can pose a serious safety hazard, especially if they’re made of metal. They can easily be knocked loose by high winds or heavy snow, and if they fall, they can seriously injure someone.
- It’s unnecessary. Unless you live in an area with a lot of rainfall, your gutters probably don’t need to extend past the roof line. In most cases, they’ll do just fine if they’re the same length as your roof.
So there you have it. There’s no good reason to extend your gutters past the roof line. If you’re looking to improve your home’s appearance or safety, you’re better off investing your time and money elsewhere.
Bottom Line
If you don’t have fascia, you can still install rain gutters. You’ll just need to use hangers that are specifically designed for installation without fascia. It’s a relatively simple process, and with the right tools and materials, you can have your new rain gutters up and functioning in no time.