Measure the length of the garage eave and mark the center point.

Use a level to draw a horizontal line at the mark. This will be your reference line for installing the gutter brackets.
Place a ladder at one end of the eave and position it so that the top rung is about 3 feet from the reference line.

Have someone hold the ladder steady while you climb up to drill pilot holes for the gutter brackets. For a standard 5-inch gutter, the brackets should be spaced every 2 feet.
Use a 1/8-inch drill bit to drill pilot holes and then install the gutter brackets with gutter screws.
Repeat steps 3-5 at the other end of the eave.

Cut the gutter to length with a jigsaw and then apply a bead of gutter sealant to the ends.

How do you attach plastic gutters?

The first step is to clean the area where the gutter will be attached. This will ensure that the gutter adheres properly.
Next, measure the area where the gutter will be attached and cut the gutter to size.

Next, apply a bead of adhesive to the back of the gutter.
Finally, press the gutter into place and allow the adhesive to dry.

How do you install gutters in a garage?

Start by measuring the length of the garage’s perimeter. Add an extra 10 inches to this measurement to account for the gutters’ end caps.

Cut the gutters to length with a power saw or a hacksaw.
Install the gutters’ brackets along the garage’s perimeter, attaching them to the fascia board with screws.
Hang the gutters on the brackets, using the pre-drilled holes as a guide.

Secure the gutters in place with additional screws, placed at intervals of 2 to 3 feet.
Finally, attach the downspouts to the gutters using screws, and position them so that they drain water away from the garage’s foundation.

What screws to use for plastic gutters?

The most common screws to use for plastic gutters are #8 x 1-1/4 in. hex-head screws. These screws are made of corrosion-resistant steel and have a hex head that can be driven with a standard screwdriver. The sharp point of the screw penetrates the plastic gutter material easily, and the wide threads provide good holding power.

What is the best way to attach gutters?

There are a few ways to attach gutters, but the best way is to use brackets. Brackets are easy to install and they provide a strong hold for your gutters. You can find brackets at most hardware stores.

Do you use nails or screws for gutters?

Nails have been used for centuries to fasten things together and they are still a popular choice for many people. They are easy to use and they don’t require any special tools. The downside to using nails is that they can be prone to popping out over time, especially if they are not installed properly.

Screws are a newer method of attaching gutters and they have some advantages over nails. They are more secure and less likely to come loose over time. They are also easier to remove if you need to make repairs or adjustments to your gutters. The downside to using screws is that they can be more difficult to install and they require a special tool.

So, which one is the best choice? It really depends on your personal preference. If you want something that is easy to install and doesn’t require any special tools, then nails are a good choice. If you want something that is more secure and less likely to come loose, then screws are a better choice.

How long does plastic guttering last?

Plastic guttering can last for many years if it is properly maintained. However, over time, the sun can cause the plastic to become brittle and eventually crack. Also, leaves and other debris can clog the gutters, which can cause them to sag or even break.

Should you put gutters on a garage?

The answer to this question is that it depends on the climate and the amount of rainfall in your area. If you live in an area with a lot of rainfall, then gutters on your garage can help to keep the rainwater from damaging the foundation of your garage. However, if you live in an area with a moderate amount of rainfall, you may not need gutters on your garage.

Bottom Line

If you’re looking for an easy and affordable way to protect your garage from water damage, installing plastic gutters is a great option. Plus, they’re easy to install yourself in just a few simple steps. Just be sure to measure and cut the gutters to fit your garage’s specific dimensions.