How To Install A Downspout To An Existing Gutter You Tube

  1. Begin by measuring the length of downspout you will need and then cut it to size.
  2. Next, mark the location of the holes for the brackets that will secure the downspout to the gutter.
  3. Drill the holes and then secure the downspout in place with the brackets.
  4. Finally, attach the end cap to the downspout to complete the installation.

Can you add downspout to existing gutter?

Yes, you can add a downspout to an existing gutter, but it is not a simple process. You will need to cut a hole in the gutter to insert the downspout, and then seal the hole with caulk or another sealant. You will also need to attach the downspout to the gutter with brackets or hangers.

How do you attach a downspout to a gutter?

  1. Measure the length of your downspout and mark it with a pencil.
  2. Cut the downspout to the desired length with a pipe cutter or hacksaw.
  3. Drill a pilot hole in the center of one end of the downspout using a 1/4 inch drill bit.
  4. Enlarge the pilot hole to 1 inch in diameter with a hole saw.
  5. Drill a counter sink hole in the center of the enlarged hole.
  6. Tap the hole with a 1/4-20 tap.
  7. Screw a lag bolt into the tapped hole.
  8. Repeat steps 3-7 on the other end of the downspout.
  9. Cut a length of gutter to fit between the two lag bolts.

How do you rivet a downspout on a gutter?

  1. Begin by measuring the downspout and cutting it to size.
  2. Next, mark the placement of the holes for the rivets.
  3. Drill the holes and then insert the rivets.
  4. Finally, secure the downspout in place by tightening the rivets.
  5. That’s it! You’ve now successfully riveted a downspout onto a gutter.

How do you tie one downspout into another?

  1. Cut both downspouts to the same length, using a hacksaw.
  2. Fit one end of each downspout into the other, so that the two pieces fit snugly together.
  3. Use a zip tie to secure the two pieces together.
  4. Repeat steps 2 and 3 until both downspouts are securely fastened together.

What happens if you don’t have enough downspouts?

If you don’t have enough downspouts, your gutters will overflow and water will pour down the sides of your house. This can lead to serious water damage, both to your home and your foundation. In addition, it can create an ideal environment for mold and mildew to grow, which can further damage your home and pose a serious health risk to your family.

How much does it cost to add a downspout?

Adding a downspout to your home’s gutter system is a relatively inexpensive project. The average cost to add a downspout is between $100 and $300, with most homeowners spending around $200 for a single downspout. The cost will vary depending on the size and style of downspout you choose, as well as the type of gutter system you have. If you need to have your gutters replaced in order to add a downspout, the cost will be higher.

Bottom Line

If you’re looking to install a downspout to an existing gutter, you can follow the steps in this video. First, you’ll need to remove any debris from the gutter. Next, you’ll need to measure and cut the downspout to the appropriate length. Once you have the downspout cut, you’ll need to attach it to the gutter using brackets and screws. Finally, you’ll need to attach the downspout to the ground using a drainpipe. With these simple steps, you can easily install a downspout to an existing gutter.